hjelp: trenger hjelp til å lese ut turbotrykk fra vag-com

jeg har klippt masse vekk for den var jo jævelig lang ,men hvis dere ser nederst ,-stemmer det at jeg har vært helt oppe i 1,51 bar i turbotrykk eller? eller er jeg helt på bærtur nå??

 

 

 

 

 

 

Sunday,10,January,2010,18:59:15

8E0 909 518 AQ,,1.8L R4/5VT G 0010,

 

,Group A:,'119,,,,Group B:, Not Running,,,,Group C:, Not Running

,,RPM,Lambda,Load,Absolute Pres.,,,,,,,,,,

,TIME,,,,,TIME,,,,,TIME,,,,

Marker,STAMP, /min, %, %, mbar,STAMP,,,,,STAMP,,,,

,0.00,1880,0.0,0.0,1050.0,,,,,,,,,,

,0.06,1880,0.0,0.0,1050.0,,,,,,,,,,

,0.12,1880,0.0,0.0,1060.0,,,,,,,,,,

,0.18,1880,0.0,1.2,1060.0,,,,,,,,,,

,0.25,1880,0.0,44.7,1070.0,,,,,,,,,,

,0.31,1920,0.0,57.3,1070.0,,,,,,,,,,

,0.37,1920,0.0,67.8,1090.0,,,,,,,,,,

,0.43,1920,0.0,95.3,1100.0,,,,,,,,,,

,0.50,1920,0.0,95.3,1110.0,,,,,,,,,,

,0.56,1960,0.0,95.3,1130.0,,,,,,,,,,

,0.62,1960,0.0,95.3,1150.0,,,,,,,,,,

,82.95,3880,-2.2,95.3,1220.0,,,,,,,,,,

,83.01,3560,-2.2,95.3,1300.0,,,,,,,,,,

,83.08,3320,-2.2,95.3,1450.0,,,,,,,,,,

,83.14,3400,-2.2,95.3,1540.0,,,,,,,,,,

,83.20,3400,-2.2,95.3,1660.0,,,,,,,,,,

,83.27,3440,-2.2,95.3,1790.0,,,,,,,,,,

,83.33,3480,-2.2,75.3,1920.0,,,,,,,,,,

,83.39,3480,-2.2,74.5,2050.0,,,,,,,,,,

,83.45,3520,-2.2,74.9,2140.0,,,,,,,,,,

,83.52,3520,-2.2,78.0,2240.0,,,,,,,,,,

,83.58,3560,-2.2,77.3,2300.0,,,,,,,,,,

,83.64,3600,-2.2,76.5,2340.0,,,,,,,,,,

,83.70,3640,-2.2,76.1,2410.0,,,,,,,,,,

,83.77,3640,-2.2,75.3,2460.0,,,,,,,,,,

,83.83,3680,-2.2,73.7,2470.0,,,,,,,,,,

,83.89,3720,-2.2,72.9,2510.0,,,,,,,,,,

,83.95,3720,-2.2,71.8,2510.0,,,,,,,,,,

,84.02,3760,-2.2,71.0,2500.0,,,,,,,,,,

,84.08,3800,-2.2,69.0,2500.0,,,,,,,,,,

,84.14,3800,-2.2,67.1,2490.0,,,,,,,,,,

ser det nå at jeg må jo trekke ifra 0050,0 så da er det 1,46? men alikavel veldig mye syns jeg......

 

da jeg chippet den var den på 1,3bar

 

også har jeg byttet til autobahn innsug og byttet til n75 H ventil.....

 

spørs om dette er et bevis for at det gir resultat? hvis det stemmer det jeg har lest ut her....

 

er steg 2 fra chipsenter på den og må si at den går ganske bra.( vil ikke ha kommertar fra dere som aldri får nok...)dette er en helt orginal kun chippet bil. med kun en fattig familiefar bak rattet som er meget foenøyd...så ikke noe spydigheter her.

1,5bar på en K03? Ække det fali det'a?

er jo pare peak på 1,46

 

det ligger på 1.3-1.35 normalt men det peaker da til 1.46 i ny og ne på bla. 3 gir i motbakke.....

 

håper det går bra??