#1 Skrevet Juni 22, 2014 Hei, EPC lampen lyser og jeg mister motorkraften, virker som den går i nødmodus. Opplevde også at den mista all motorkraften og ikke noe skjedde når jeg ga gass verken når jeg hadde clutchen inne også. Fikk ikke til å ruse. Ingenting skjedde. Dette har skjedd 2 ganger. Noen som vet noe? 0 Del dette innlegget Lenke til innlegg Del på andre sider Flere delingsalternativer...
#2 Skrevet Juni 22, 2014 Defekte Eksos temp sensorer? Få kjørt en vagcom test på den 0 Del dette innlegget Lenke til innlegg Del på andre sider Flere delingsalternativer...
#3 Skrevet Juni 23, 2014 Sunday,23,June,2014,16:24:46:61293 VCDS -- Windows Based VAG/VAS Emulator VCDS Version: 12.12.2.0 (x64) Data version: 20140212 VIN: WUAZZZ8DZ1N905846 License Plate: Mileage: 145670km-90515mi Repair Order: -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Chassis Type: 8D (8D - Audi A4/S4/RS4 B5 (1995 > 2001)) Scan: 01 02 03 08 15 16 17 25 35 37 45 55 56 57 67 75 76 77 VIN: WUAZZZ8DZ1N905846 Mileage: 145670km/90515miles ------------------------------------------------------------------------------- Address 01: Engine Labels: 078-907-551-AZA.lbl Part No: 8D0 907 551 C Component: 2.7l V6/5VT G 0002 Coding: 05611 Shop #: WSC 78131 VCID: 2A5BF630D610444EE53-5140 3 Faults Found: 17964 - Charge Pressure Control P1556 - 35-10 - Negative Deviation - Intermittent 18047 - Accelerator Position Sensor 1/2 (G79/G185) P1639 - 35-10 - Implausible Signal - Intermittent 18042 - Accelerator Position Sensor 2 (G185) P1634 - 35-10 - Signal too High - Intermittent Readiness: 0000 0000 ------------------------------------------------------------------------------- Address 03: ABS Brakes Labels: 8E0-614-111-EDS.lbl Part No: 8E0 614 111 A Component: ABS/EDS 5.3 QUATTRO D10 Shop #: BB 24334 VCID: 1C3720E88C44AAFE67F-5124 No fault code found. ------------------------------------------------------------------------------- Address 08: Auto HVAC Labels: 8D0-820-043-1D.lbl Part No: 8D0 820 043 P Component: A4 KLIMAAUTOMAT D54 Coding: 00060 Shop #: WSC 06325 VCID: 2D51FD2CE7FE5376001-2592 No fault code found. ------------------------------------------------------------------------------- Address 15: Airbags Labels: 8D0-959-655-AI8.lbl Part No: 8D0 959 655 J Component: Airbag Front+Seite 0001 Coding: 00104 Shop #: WSC 06325 VCID: 3D71CD6C379EC3F6B01-515E 4 Faults Found: 65535 - Internal Control Module Memory Error 00-00 - - 01218 - Side Airbag Igniter; Passenger Side (N200) 32-10 - Resistance Too High - Intermittent 01211 - Belt Tensioner Igniter; Rear Driver Side (N196) 32-10 - Resistance Too High - Intermittent 01211 - Belt Tensioner Igniter; Rear Driver Side (N196) 33-10 - Resistance Too Low - Intermittent ------------------------------------------------------------------------------- Address 17: Instruments Labels: 8D0-920-xxx-17.lbl Part No: 8D0 920 933 Component: B5-KOMBIINSTR. VDO D13 Coding: 00164 Shop #: WSC 00230 VCID: E6C3C2008288202E81B-5140 WUAZZZ8DZ1N905846 AUZ7Z0A1875389 3 Faults Found: 01300 - Control Module for Navigation with CD-Rom (J401) 49-00 - No Communications 01304 - Radio 49-00 - No Communications 01311 - Information Data Bus 37-10 - Faulty - Intermittent ------------------------------------------------------------------------------- Address 35: Centr. Locks Labels: 8D0-862-257.lbl Part No: 8D0 862 257 Component: ZV-Pumpe, DWA, Funk D12 Coding: 13131 Shop #: WSC 06325 VCID: EADBB6309690044EA53-4EEA 4 Faults Found: 01371 - Alarm triggered by Door Contact Switch; Driver's Side 35-00 - - 01374 - Alarm triggered by Terminal 15 35-00 - - 01370 - Alarm triggered by Interior Monitoring 35-00 - - 01389 - Tailgate Open Switch (F124) 29-00 - Short to Ground ------------------------------------------------------------------------------- Address 37: Navigation Labels: 4B0-035-192-RNSD-37.lbl Part No: 4B0 035 192 A Component: Navigation 0001 Coding: 00000 Shop #: WSC 02325 VCID: 1B3523F4894AADC66E5-4AE8 2 Faults Found: 00854 - Radio Display Output in dash Panel insert 49-00 - No Communications 00862 - Antenna for GPS Navigation (R50/R52) 36-00 - Open Circuit ------------------------------------------------------------------------------- Address 45: Inter. Monitor Labels: 4B0-951-173.lbl Part No: 4B0 951 173 Component: Innenraumueberw. D03 Coding: 00101 Shop #: WSC 06325 VCID: E0CFD41860AC4E1E7B7-4B4C No fault code found. ------------------------------------------------------------------------------- Address 55: Xenon Range Labels: 4B0-907-357-AUT.lbl Part No: 4B0 907 357 Component: LEUCHTWEITEREGLER D003 Coding: 00012 Shop #: WSC 06325 VCID: E5C1C50C7F8E2B36881-517C No fault code found. ------------------------------------------------------------------------------- Address 56: Radio Labels: 4B0-035-192-RNSD-56.lbl Part No: 4B0 035 192 A Component: Radio 0001 Coding: 00217 Shop #: WSC 02325 VCID: 1B3523F4894AADC66E5-4ACE 2 Faults Found: 00854 - Radio Display Output in dash Panel insert 49-00 - No Communications 00855 - Connection to CD changer 49-10 - No Communications - Intermittent End --------------------------------------------------------------------- 0 Del dette innlegget Lenke til innlegg Del på andre sider Flere delingsalternativer...
#4 Skrevet Juni 24, 2014 Ingen som vet? 0 Del dette innlegget Lenke til innlegg Del på andre sider Flere delingsalternativer...
#5 Skrevet Juni 24, 2014 17964/P1556 - Charge Pressure Control: Negative Deviation Possible Symptoms Reduced power output Limp mode Possible Causes Boost Pressure too Low Hoses/Pipes incorrect connected, disconnected or leaking Charger Pressure Control defective VNT (variable nozzle turbo): nozzles stuck Solenoid Valve for Boost Pressure Control (N75) defective Possible Solutions Check Hoses/Pipes to/between Components Check Solenoid Valve for Boost Pressure Control (N75) Check / Clean / Replace Charge Pressure Control Check / Clean mechanism for variable nozzles 18047/P1639/005689 - Accelerator Position Sensor 1/2 (G79/G185): Implausible Signal Possible Symptoms Malfunction Indicator Light (MIL) ON Reduced Engine Output Possible Causes Wiring and/or connections faulty Faulty ECM Faulty Accelerator Pedal Possible Solutions Check Measuring Block Readings for Accelerator Pedal Check Voltage Signals from ECM to Throttle Pedal (see factory repair manual) Check Wiring and Connectors from ECM to Accelerator Pedal Special Notes There are 2 sensors in the accelerator pedal, both should increase in the same direction as the accelerator is pressed but they have different scales. This means one counts from 0 to 100, while the other one counts from 0 to 50. Accelerator Position Sensor faults can be caused by issues with the Oxygen Sensor(s) and it's wiring. Please verify this BEFORE replacing the ECM or Accelerator Pedal. Accelerator Pedal failure is very rare. 18042/P1634/005684 - Accelerator Position Sensor 2 (G185): Signal too High Possible Symptoms Malfunction Indicator Light (MIL) ON Reduced Engine Output Possible Causes Wiring and/or connections faulty Sensor (G185) faulty Possible Solutions Have a look at the Pedal Position Sensor assembly, not the Throttle Body. Check all connections between ECU and accelerator pedal - of course the pedal itself could be defective too. Special Notes There are 2 sensors in the accelerator pedal, both measure the same except that they are working in opposite directions. This means one counts from 0 to 100, while the other one counts from 100 to 0. Accelerator Position Sensor faults can be caused by issues with the Oxygen Sensor(s) and it's wiring. Please verify this BEFORE replacing the ECM or Accelerator Pedal. Accelerator Pedal failure is very rare. 0 Del dette innlegget Lenke til innlegg Del på andre sider Flere delingsalternativer...
#6 Skrevet Juni 24, 2014 Slange som har hoppet av? Prøv å få tatt en trykktest. Evt. fått resatt gassspjeldet. 0 Del dette innlegget Lenke til innlegg Del på andre sider Flere delingsalternativer...
#7 Skrevet Juni 24, 2014 Slange som har hoppet av? Prøv å få tatt en trykktest. Evt. fått resatt gassspjeldet. Hmm, det kommer og går? Nå lyser ikke lampen lenger. Hvordan gjør jeg det? 0 Del dette innlegget Lenke til innlegg Del på andre sider Flere delingsalternativer...
#8 Skrevet Juni 24, 2014 http://wiki.ross-tech.com/wiki/index.php/Throttle_Body_Alignment_%28TBA%29 0 Del dette innlegget Lenke til innlegg Del på andre sider Flere delingsalternativer...
#9 Skrevet Juli 8, 2014 Hvordan gikk det her? 0 Del dette innlegget Lenke til innlegg Del på andre sider Flere delingsalternativer...
#10 Skrevet Juli 8, 2014 Lampen har ikke kommet tilbake så jeg lar det vente 0 Del dette innlegget Lenke til innlegg Del på andre sider Flere delingsalternativer...