VAG-COM Measuring Block Labels obd1 vr6

Anbefalte innlegg

hvordan for man brukt disse i vag com?

 

; VAG-COM Measuring Block Labels for

; All OBD-I VR6, ECU p/n 021-906-258-xx

;

;

1,0,General Engine Data

1,1,RPM,Engine Speed

1,2,Coolant,Temperature

1,3,O2,Active

1,4,Ignition,Timing

;

2,0,General Engine Data

2,1,RPM,Eng Speed

2,2,Injector,ON Time

2,3,Battery,Voltage

2,4,EGR Temp,(if available)

;

3,0,General Engine Data

3,1,RPM,Engine Speed

3,2,Engine,Load (%)

3,3,Throttle Angle,

3,4,Intake Air,Temp - Manifold

;

4,0,General Engine Data

4,1,RPM,Engine Speed

4,2,Engine,Load (%)

4,3,Vehicle,Speed

4,4,Switch Postn,Binary Codes

;

; Binary Codes - Grp 04, Measuring Channel 4.

; 10000 - Acceleration enrichment

; 01000 - Wide Open Throttle

; 00100 - Partially Open Throttle

; 00010 - Idle Position

; 00001 - Deceleration

; 00000 - Switch position NOT OK

; (activate DTC memory again if this code appears)

;

5,0,Idle Control

5,1,RPM,Engine Speed

5,2,ISV,Adaptation

5,3,ISV,Duty Cycle(%)

5,4,Switch Postn,Binary Codes

;

; Binary Codes - Grp 05, Measuring Channel 4.

; 10-00 - A/C Compressor ON

; 01-00 - A/C Compressor OFF

; 00-10 - Transmission engagement (for automatic transmission ONLY)

; 00-01 - Drive Step (for automatic transmission ONLY)

;

6,0,Fuel Trim (O2 Sensor)

6,1,O2,Active

6,2,Idle,Adapted Value

6,3,Part Throttle,Adapted Value

6,4,Full Throttle,Adapted Value

;

; Less than 1.0 is rich, greater than 1.0 is lean

;

Del dette innlegget


Lenke til innlegg
Del på andre sider

ingen som har peiling på odb1 og vag-com?: gråter :

Del dette innlegget


Lenke til innlegg
Del på andre sider



VACN 2018- Powered by Invision Community

Bli medlem
×

Viktig informasjon

Vi har plassert informasjonskapsler/cookies på din enhet for å kunne vise siden slik vi har utviklet den.
Godtar du ikke dette, må du avslutte bruken og forlate vårt nettsted, ellers vil VACN anta du aksepterer dette.